HOW TO REMOVE AN AUDI A6 HEADLIGHT ASSEMBLY

Se Aplica A: AUDI A6 (1997-2004) This guide applies to 1997-2004 Audi A6 models


Check out our helpful video detailing the instructions for removing Audi A6 headlights on 1997-2004 Audi A6 models. We have also provided a step-by-step guide as part of our Audi A6 headlight assembly removal instructions.

This guide applies to 1997-2004 Audi A6 models

Punta De Tracción: If the bumper cover isn't already removed from the vehicle on the yard, you'll have to remove this first.

Tiempo Estimado De Extracción: 10 minutes

Herramientas Recomendadas

  • Punta Torx T-30 Punta Torx T-30
  • Carraca Carraca
  • Extensiones de carraca Extensiones de carraca

Instrucciones

  • 1

    There are a total of four fasteners that hold headlight in place. Two are at the top and the other two are located on the bottom.

  • 2

    To get to the lower outer fastener, you will need to go through the access hole with the T30.

  • 3

    Remove the other lower T30

  • 4

    Remove the two T30 bolts on the top

  • 5

    Now that the fasteners are removed, you will be able to pull the headlight straight out.

  • 6

    With the headlight loose, disconnect the electrical connector and the headlight will be completely detached

Transcripción Del Vídeo

Hey, everybody, Charles for HumbleMechanic.com back with another DIY and Drive tutorial with Pull-A-Part Used Auto Parts. Today, I'm going to show you how to remove a headlight on an Audi. Now, you're going to need to remove the bumper cover before taking the headlight out. Refer to my other video I did, and I'll show you exactly how to do that. The tools we're going to need for this job is going to be a T30 torques, as well as a long extension to reach the bottom fastener. Now, we have a total of four fasteners holding on the headlight. We have two at the top, one here, and one here. To get to the lower, outer fastener, we need to go through this access hole with our T30. And finally, the two on the top.

Now that we have the fasteners removed, we can go ahead and pull the headlight out. Now, you may need to persuade it a little bit, because I purposefully left that very first bolt in the headlight. We also don't want to cause any damage to our electrical connectors. With the headlight removed, we can easily disconnect our electrical connector, and here is that bolt that I deliberately left in place.

All right, guys, this is Charles for HumbleMechanic.com. Thanks for watching, and I will see you next time.

¿Eres Nuevo En Pull-A-Part? Aprenda El Proceso

Buscar En Nuestro Inventario

Encuéntralo En Tu Pull-A-Part Más Cercano.

O

Ver Precios De Piezas

Conozca El Coste Antes De Ir A La Tienda.

Buscar Vídeos De Extracción De Piezas

¿No ves tu marca o modelo?
Solicitar Un Vídeo

  1. U-Pull-&-Pay >
  2. Videoteca >
  3. Guías de extracción de piezas >
  4. How to Pull an Audi Headlight: Audi A6 1997-2004